Effegibi Koko XXL Sauna

Koko is a Finnish word that expresses the concept of shape, dimension, size. Drawing inspiration from this, we have given each model a simple code that immediately identifies its size. With stylish good looks by Talocci design and an oak exterior, Koko also features doors made of tempered glass which give even the smallest models a light, spacious feeling.

Koko combines a family-size sauna with refined design and quality materials, characteristics that enable this sauna to blend seamlessly with any room in your home. Koko is available in 4 different external finishings that lend it outstanding versatility for fitting into the context of your home decor.

Dimensions (cm):

• 212 x 160 x 200 h

Persons:

• 4/5

Power Requirements:

• 6 kW max - 230 V ~ 50 Hz - 400 V 3N ~ 50 Hz

Materials:

• Outside: Oak - Maple - Light Walnut - Wenge
• Inside: Canadian Hemlock
• Furnishings: Abachi

Other Features:

• Lighting System LED RGB

Structure Comprehensive Of:

• Heater with rocks
• Electronic control panel with light graphic display, presetting function, watch, automatic energy control system
• Wall canalized electrical system
• Low emission tempered glasses 8 mm
• Bucket and ladle in wood
• N. 2 headrest / backrest
• Sand glass
• Equipped panel with shelf, towel holder and cushions

Example Installation:

All the research done by Effegibi into sauna assembly and installation plus the handy instruction manual we provide make the job simplicity itself.

What’s more we have an extensive network of approved help centres ready to lend all possible assistance and test the unit’s functions.

It is always recommended that any electrical work is carreid out by a qualified electrician.

ELECTRICAL SAFETY:
EFFEGIBI saunas are manufactured and tested in accordance with European standards to guarantee maximum user safety.

ELECTRICAL CONNECTIONS:
The electrical power supply must be in compliance with IEC 364-1 standard (or national harmonized standard) and with statutory regulations for the country of installation. The sauna must be connected to the power supply by way of an isolating switch with a residual current device (30 mA) and thermal-magnetic circuit breaker of rating to match the electrical input; the
switch must guarantee a minimum gap between open contacts of 3mm.

The electrical connection must be:
- permanent
- able to handle the rated current.
If the sauna is to be installed in a bathroom area, the following requirements must be met:
- the isolating switch must be sited away from areas 0, 1, 2 and 3 (CEI
64-8/7 in Italy)
-the electrical connection must be specified to protection category
IPX4 and sited away from areas 0, 1(CEI 64-8/7)

The product must be installed directly on the floor and against finished walls.

Effegibi saunas are manufacturered to order. The delivery time varies depending on the complexity of the unit ordered.

Please allow 6-8 weeks for delivery to take place.

We are so confident in the quality of our products and that you will be satisfied, so if you are not happy with any aspect of your sauna when it is arrives, you can send it back for a full refund.