Effegibi Sky 60 Sauna

The simple lines have transformed the sauna into an item of furniture styled to fit attractively into any part of the home. The clear glass reaching up to the ceiling fills your sauna with light, giving you wellbeing and relaxation in an atmosphere of freedom and lightness.

Dimensions (cm):

• 200 x 180 x 202 h

Persons:

• 4/5

Power Requirements:

• 6 kW max - 230 V ~ 50 Hz - 400 V 3N ~ 50 Hz

Materials:

• Outside: Canadian Hemlock
• Inside: Canadian Hemlock
• Furnishings: Canadian Hemlock

Other Features:

• Lighting System LED RGB

Structure Comprehensive Of:

• Heater with rocks
• Electronic control panel with light graphic display, presetting function, watch, automatic energy control system
• Wall canalized electrical system
• Low emission tempered glasses 8 mm
• Bucket and ladle in wood
• N. 2 headrest / backrest
• Sand glass

Example Installation:

All the research done by Effegibi into sauna assembly and installation plus the handy instruction manual we provide make the job simplicity itself.

What’s more we have an extensive network of approved help centres ready to lend all possible assistance and test the unit’s functions.

It is always recommended that any electrical work is carreid out by a qualified electrician.

ELECTRICAL SAFETY:
EFFEGIBI saunas are manufactured and tested in accordance with European standards to guarantee maximum user safety.

ELECTRICAL CONNECTIONS:
The electrical power supply must be in compliance with IEC 364-1 standard (or national harmonized standard) and with statutory regulations for the country of installation. The sauna must be connected to the power supply by way of an isolating switch with a residual current device (30 mA) and thermal-magnetic circuit breaker of rating to match the electrical input; the
switch must guarantee a minimum gap between open contacts of 3mm.

The electrical connection must be:
- permanent
- able to handle the rated current.
If the sauna is to be installed in a bathroom area, the following requirements must be met:
- the isolating switch must be sited away from areas 0, 1, 2 and 3 (CEI
64-8/7 in Italy)
-the electrical connection must be specified to protection category
IPX4 and sited away from areas 0, 1(CEI 64-8/7)

The product must be installed directly on the floor and against finished walls.

Effegibi saunas are manufacturered to order. The delivery time varies depending on the complexity of the unit ordered.

Please allow 6-8 weeks for delivery to take place.

We are so confident in the quality of our products and that you will be satisfied, so if you are not happy with any aspect of your sauna when it is arrives, you can send it back for a full refund.